Chat with us, powered by LiveChat

Secure Checkout
PVDF Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Sterile, 100/Pk

Thumbnail Filmstrip of PVDF Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Sterile, 100/Pk Images

    Purchase PVDF Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Sterile, 100/Pk

    PVDF Syringe Filters, 3.0um, 25mm, Double Luer Lock, PP Housing, Sterile, 100/Pk
    Tisch SKU: SPEC18215

    $188.95
    Ships in 4 weeks
     

    Tisch Scientific PVDF Syringe Filters, 3 µm, 25 mm, 100/Pk - SPEC18215

    Tisch Scientific reduces per-unit costs for laboratories that place blanket purchase agreements or large-quantity orders. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. Hydrophobic PVDF passes gases freely while holding back water while holding up to alcohols and mild hydrocarbon solvents and clarifies samples at the rated pore size. Polypropylene housing is factory-sterilized and packaged to preserve that state until use and preserves sample chemistry across the flow path. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.

    Membrane Characteristics

    • Ethylene oxide sterilization cycles leave pore integrity and flow performance intact
    • Autoclave sterilization cycles leave pore structure and flow performance intact
    • Chemical compatibility spans the full pH 1 to 14 range
    • Cast membrane structure releases no fibers, unlike depth-media prefilters
    • Hydrophobic surface supports sterile venting of air and process gases

    Housing Characteristics

    • PP housing supplied sterile in individual packaging for immediate use in aseptic filtration without bench preparation
    • Impact-tolerant polypropylene body withstands routine bench handling without damage
    • Minimal extractable release from the housing supports sensitive analytical work downstream
    • Withstands ethylene oxide gas sterilization without embrittlement or structural damage

    A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.

    Sterilization Guidance

    Sterile single-use packaging removes any in-lab sterilization preparation step.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Burst Pressure (psi)
    116psi
    Connection Type
    Double Luer Lock
    Construction
    Polypropylene (PP)
    Diameter
    25mm
    Dimensions (W x D x H)
    21.8mmx28.6mm
    Material
    Polyvinylidene Fluoride (PVDF)
    Maximum Operating Pressure
    72.5psi
    Maximum Operating Temperature (°C)
    80℃
    Pack Count
    100
    Pore Size (µm)
    3.0
    Sterility
    Sterile
    Weight
    0.70
    Wettability
    Hydrophobic
    • Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
    • Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
    • QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
    • Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
    • Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
    • Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.