Tisch Scientific PVDF Syringe Filters, 5 µm, 25 mm, 100/Pk - SPEC18216
Tisch Scientific vets its filtration partners carefully, favoring those with a consistent record of dependable output. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. The hydrophobic PVDF membrane blocks aqueous ingress in venting applications and holds up to alcohols and mild hydrocarbon solvents. The PP housing is factory-sterilized and individually wrapped for aseptic sample preparation while keeping sample purity intact through the filtration pass and holds its seal true run after run. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Autoclave sterilization cycles leave pore structure and flow performance intact
- Resistance to hydrolytic degradation exceeds that of nylon membranes
- Fluorinated polymer chemistry resists ozone, UV, and ionizing radiation
- Vapor-phase hydrogen peroxide decontamination cycles leave the membrane intact
- Chemical compatibility spans the full pH 1 to 14 range
Housing Characteristics
- Standardized luer connection geometry provides secure engagement with standard syringe tips
- Sterile barrier packaging assures the housing's factory-sterilized state is intact at the point of use
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
A filter that softens or swells in your solvent fails you mid-run, batch after batch. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request blanket-order pricing and paperwork support for your routine filtration purchases.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Polypropylene (PP)
- Diameter
- 25mm
- Dimensions (W x D x H)
- 21.8mmx28.6mm
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Sterility
- Sterile
- Weight
- 0.70
- Wettability
- Hydrophobic
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Robust Particulate Filtration - Withstands high pressure differentials while handling heavy particulate loads, extending membrane service life.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.
- Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
- Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.