Tisch Scientific PVDF Syringe Filters, 1 µm, 20 mm, 100/Pk - SPEC18219
Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. PVDF resists HPLC mobile phases, alcohols, and mild hydrocarbons while passing gases freely and holding back water and clarifies samples at the rated pore size. ABS construction holds up to aqueous samples and buffers in routine prep and carries high impact strength into a small device. When chromatographic methods demand particle-free injections, the column stays clean from run to run, protecting method performance and column life.
Membrane Characteristics
- Gamma irradiation sterilization causes no chain scission unlike polypropylene membranes
- Hydrochloric, dilute nitric, and up to 90% sulfuric acid cause no attack
- Low extractables preserve a clean chromatographic baseline
- Hydrophobic surface chemistry gives PVDF a water contact angle above 100 degrees, blocking wetting
- Organic solvent resistance beats PES or nylon at comparable pore size
Housing Characteristics
- ABS housing resists aqueous detergents and surfactants in cleaning-step protocols
- Low extractable content from the ABS housing keeps filtrate analytical cleanliness high
- Opaque body shields light-sensitive samples during the pass
- Creep resistance at ambient temperature keeps the housing seal load stable over time
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on so your filter holds its integrity through the run. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.45psi
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Dimensions (W x D x H)
- 23mmx25.2mm
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 1.0
- Sterility
- Nonsterile
- Weight
- 0.60
- Wettability
- Hydrophobic
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.
- Culture Vessel Filling - Equalizes pressure in sealed culture vessels by venting displaced air, keeping fill and drain lines fully closed.
- Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Compressed Gas Filtration - Passes nitrogen and other inert gases freely while holding back moisture, protecting instruments and gas lines.