Tisch Scientific PVDF Syringe Filters, 5 µm, 20 mm, 100/Pk - SPEC18221
Tisch Scientific's representatives greet every caller with patience, whatever brings them to the phone. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. Hydrophobic PVDF repels water for dependable gas and vent filtration and holds absolute retention steady across the entire membrane. The ABS housing resists aqueous acids, bases, and alcohols in routine use and channels the full sample through the membrane rather than around it. For routine sample preparation across many methods, each analytical run starts with a consistent, particle-free sample without added hardware or a cleaning step.
Membrane Characteristics
- Hydrophobic surface chemistry gives PVDF a water contact angle above 100 degrees, blocking wetting
- Ethylene oxide sterilization cycles leave pore integrity and flow performance intact
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Gamma irradiation sterilization causes no chain scission unlike polypropylene membranes
- Thin membrane structure sustains high flow for fast sample throughput
Housing Characteristics
- Rigid ABS wall keeps the flow path geometry stable in use
- ABS housing remains stable in contact with dilute acetic acid and citric acid solutions
- Luer-fit housing geometry interfaces securely with standard luer-type syringe barrels
- Creep resistance at ambient temperature keeps the housing seal load stable over time
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Dimensions (W x D x H)
- 23mmx25.2mm
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Sterility
- Nonsterile
- Weight
- 0.60
- Wettability
- Hydrophobic
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Culture Vessel Filling - Equalizes pressure in sealed culture vessels by venting displaced air, keeping fill and drain lines fully closed.
- Organic Solvent Filtration - Wets readily with alcohols and mild hydrocarbons, delivering dependable clarification of organic solvent samples.
- Bioreactor Vent Protection - Repels water while venting bioreactors and fermenters, keeping process air and gases moving freely through the line.
- Robust Particulate Filtration - Withstands high pressure differentials while handling heavy particulate loads, extending membrane service life.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.