Tisch Scientific PVDF Syringe Filters, 5 µm, 20 mm, 100/Pk - SPEC18226
Tisch Scientific holds its filtration pricing at levels that let budget-conscious laboratories stretch procurement dollars further. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. Hydrophobic PVDF passes gases freely while holding back water and holds absolute retention steady across the entire membrane. The rigid ABS housing keeps a tight edge seal against the membrane and carries high impact strength into a small device. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.
Membrane Characteristics
- Resistance to hydrolytic degradation exceeds that of nylon membranes
- Cast membrane structure releases no fibers, unlike depth-media prefilters
- Low ionic extractables preserve baseline stability in conductivity-based ion chromatography detection
- Fluoropolymer chemistry resists microbial and fungal degradation
- Hydrochloric, dilute nitric, and up to 90% sulfuric acid cause no attack
Housing Characteristics
- Withstands saline and seawater sample matrices up to 60°C
- Housing integrity maintained at warm sample temperatures up to 80°C
- Impact-modified terpolymer absorbs bench drops without cracking
- Luer-fit housing geometry interfaces securely with standard luer-type syringe barrels
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Start a live chat with the Tisch Scientific team for real-time updates on product availability, lead time, or your order status.
Sterilization Guidance
Factory sterilization supports immediate use in workflows where sterility assurance matters.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 116psi
- Connection Type
- Double Luer Lock
- Construction
- Acrylonitrile Butadiene Styrene (ABS)
- Diameter
- 20mm
- Dimensions (W x D x H)
- 23mmx25.2mm
- Material
- Polyvinylidene Fluoride (PVDF)
- Maximum Operating Pressure
- 72.5psi
- Maximum Operating Temperature (°C)
- 80℃
- Pack Count
- 100
- Pore Size (µm)
- 5.0
- Sterility
- Sterile
- Weight
- 0.72
- Wettability
- Hydrophobic
- Dissolution Testing - Removes undissolved particles from timed USP 711 dissolution aliquots, preventing skewed potency and release results.
- Vial and Tubing Venting - Blocks liquid while venting sealed vials and tubing lines, keeping pressure equalized during fluid transfer steps.
- Petroleum Sample Prep - Removes particulates from fuel and lubricant samples ahead of viscosity and quality-control testing.
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Culture Vessel Filling - Equalizes pressure in sealed culture vessels by venting displaced air, keeping fill and drain lines fully closed.
- QuEChERS Extract Prep - Removes co-extracted waxes and pigments from QuEChERS extracts, protecting GC-MS and LC-MS systems during pesticide testing.