PP Syringe Filter, 0.45µm, 13mm, Nonsterile, Hydrophobic Membrane, Luer Lock, 100/Pk
LabExact SKU: LE-IWT-ES10129

LabExact Polypropylene (PP) Syringe Filters, 0.45 µm, 13 mm, 100/Pk - LE-IWT-ES10129

Sample preparation for chromatography often ends with a syringe filter on the path to the vial. Polypropylene tolerates solvents and acids that degrade many membranes while sustaining throughput as a depth medium and keeps water out during solvent and gas-purge steps. The PP housing sustains efficient flow on viscous samples and delivers a chemically clean filtrate to the downstream step. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.

Membrane Characteristics

• Operating pressure reaches 72 psi with a burst rating near 116 psi
• Sustains throughput on particulate-laden solvent samples
• Nominal depth matrix distributes particulate load progressively through the medium volume
• Aqueous liquid is repelled while air passes freely through
• Broad solvent tolerance includes glycols, aliphatic alcohols, and dilute salt solutions

Housing Characteristics

• Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
• Thermal-bonded construction keeps adhesives out of the fluid path
• Withstands standard 121°C steam autoclave cycles without softening or structural distortion
• Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening

An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.

Sterilization Guidance

The housing supports customer autoclave sterilization at 121°C for 30 minutes.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Diameter

13mm

Material

Polypropylene (PP)

Pack Count

100

Pore Size (µm)

0.45

Sterility

Nonsterile

Weight

0.168

Wettability

Hydrophobic

Whatman Equivalent

6788-1304

• Industrial Solvent Monitoring - Clarifies organic solvent process streams and used-solvent recovery batches for quality and contamination analysis.
• Battery Electrolyte Analysis - Filters lithium-ion battery electrolytes in carbonate and ether organic solvents for purity and additive testing.
• Alcohol Solution Filtration - Clarifies methanol, ethanol, and isopropanol solutions for HPLC and GC analysis without swelling.
• Injector Port Protection - Removes cell debris and protein precipitates before injection, guarding HPLC and GC autosampler needles from wear.
• Rubber Compound Testing - Filters cyclohexane and alcohol rubber extract solutions for antioxidant and additive content analysis by chromatography.
• DMF Sample Filtration - Handles N,N-dimethylformamide polymer and pharmaceutical solutions with full chemical resistance for routine analytical prep.