Chat with us, powered by LiveChat

Secure Checkout
PTFE Syringe Filter, 0.8 um, 13mm, Nonsterile, 100/Pk

Thumbnail Filmstrip of PTFE Syringe Filter, 0.8 um, 13mm, Nonsterile, 100/Pk Images

    Purchase PTFE Syringe Filter, 0.8 um, 13mm, Nonsterile, 100/Pk

    PTFE Syringe Filter, 0.8 um, 13mm, Nonsterile, 100/Pk
    Tisch SKU: SF18321

    $107.95
    Ships in 4 weeks
     

    Tisch Scientific PTFE Syringe Filters, 0.8 µm, 13 mm, 100/Pk - SF18321

    Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. Individually packaged and pre-tested, a syringe filter needs no functional check before use the way a shared reusable holder does. Hydrophobic PTFE repels water while passing gases and solvents freely and suits solvent filtration where other membranes fail. Polyolefin construction sheds virtually no extractable material into the sample and holds its seal true run after run. Where analytical results depend on clean samples, the preparation step stays consistent from sample to sample through a pre-tested syringe filter.

    Membrane Characteristics

    • Surface energy near 18.5 dynes per centimeter repels oils and nonpolar liquids
    • Chemical resistance spans the full pH 1 to 14 range
    • Non-wetting pore surface blocks liquid water while passing water vapor freely
    • Node-fibril microstructure resists compaction under sustained operating pressure
    • Insolubility in all known organic solvents avoids swelling and pore distortion

    Housing Characteristics

    • Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
    • Minimal extractable release from the housing supports sensitive analytical work downstream
    • Resists stress cracking from aqueous salt and buffer solutions
    • Optimized internal geometry minimizes backpressure in service

    An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request comparable filtration options that may offer cost savings for your order from the Tisch Scientific team.

    Sterilization Guidance

    Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    4.35(absolute ethyl alcohol )
    Connection Type
    Luer-Lok/Luer Slip
    Construction
    PP
    Diameter
    13mm
    Filtration Area
    1.09cm²
    Flow Rate
    20ml
    Holdup Volume
    10μL
    Material
    Polytetrafluoroethylene (PTFE)
    Maximum Operating Pressure
    87psi
    Maximum Operating Temperature (°C)
    60°C
    Membrane Thickness (µm)
    80-140μm
    Pack Count
    100
    Pore Size (µm)
    0.8
    Sterility
    NonSterile
    Sterilization
    Autoclave 121°C for 30min/ Gamma 25kGy
    Volume Throughput (ml)
    10ml
    Weight
    0.19
    Wettability
    Hydrophobic
    • Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
    • Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
    • Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.
    • Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
    • Pump Protection - Acts as a hydrophobic barrier that protects vacuum pumps from corrosive moisture and particulate damage.
    • Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.