PTFE Syringe Filters, 0.45um, 13mm, Hydrophilic, Luer-Lok/Luer Slip, Nonsterile, 500/Pk
GVS SKU: FJ13BNPPH004AD01

GVS ABLUO PTFE Syringe Filters, 0.45 µm, 13 mm, 500/Pk - FJ13BNPPH004AD01

GVS syringe filters come out of the company's own United States facilities, built under the production controls its quality management system requires. Because each syringe filter is dedicated to one sample, a failed or contaminated filtration stays isolated to its own analyst's run and leaves the next analyst's queue clear. Hydrophilic PTFE accepts aqueous samples on contact without alcohol pre-wetting while resisting attack from the harshest process chemistries and clarifies solvent streams at the rated pore size. The creep-resistant MBS matrix stays pressed firmly to the membrane while absorbing handling stress at the bench and copes reliably with routine aqueous sample matrices. Where bench-scale prep must move quickly from one sample to the next, each sample starts as clean as the last without a carry-over risk or a cleaning step between uses.

Membrane Characteristics

• Node-fibril microstructure resists compaction under sustained operating pressure
• Non-fibrous, fully synthetic structure sheds no fibers into filtrate
• Absolute pore rating delivers reproducible retention across every protocol
• Insolubility in all known organic solvents avoids swelling and pore distortion
• UL 94 V-0 rating confirms the highest self-extinguishing classification

Housing Characteristics

• Hard methacrylate surface resists scuffing through repeated handling
• Sub-wavelength core-shell rubber domains toughen the methacrylate matrix without introducing optical haze
• Creep-resistant matrix holds seal geometry through the filtration run
• Bisphenol-A-free composition keeps background signal out of trace-level BPA and endocrine-disruptor testing

A particulate-laden aqueous sample makes the rest of your preparation unpredictable. General-purpose aqueous filtration supports the sample types you handle every day across your water-analysis and general analytical workflows. Start a live chat with the Tisch Scientific team about packaging, unit count, and ship-date for your filtration order.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Color

Transparent

Connection Type

Luer-Lok/Luer Slip

Construction

Ultrasonically welded

Diameter

13mm

Filtration Area

0.76 cm²

Holdup Volume

<50 µL

Inlet Connection

Female Luer Lock

Material

Polytetrafluoroethylene (PTFE)

Maximum Operating Pressure

80 psi

Maximum Operating Temperature (°C)

90

Outlet Connection

Male Luer Slip

Pack Count

500

Pore Size (µm)

0.45

Sterility

Nonsterile

Wettability

Hydrophilic

• Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.
• Chemical Synthesis - Resists aggressive organic solvents and corrosive acids for compatibility with harsh synthetic reaction mixtures.
• Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
• Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
• Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
• Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.