Chat with us, powered by LiveChat

Secure Checkout
PTFE Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk

Thumbnail Filmstrip of PTFE Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk Images

    Purchase PTFE Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk

    PTFE Syringe Filters, 0.22 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk
    Tisch SKU: SF18322

    $114.99
    Ships in 4 weeks
     

    Tisch Scientific PTFE Syringe Filters, 0.22 µm, 30 mm, 100/Pk - SF18322

    Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. Each hydrophobic vent-rated filter carries manufacturer bacterial retention testing built into the design, letting a vent line stay in continuous service without repeating that testing on site between uses. Hydrophobic PTFE delivers sterilizing-grade gas and vent filtration at the rated pore size and filters aggressive organic solvents without breakdown. The polypropylene housing resists aqueous acids, bases, and alcohols in routine use while sustaining efficient flow on viscous samples and holds its seal true run after run. A vent or gas line stays free of airborne bacteria once a hydrophobic, sterilizing-grade membrane is in the path.

    Membrane Characteristics

    • High membrane porosity, 70 to 80 percent void volume, delivers high flow at low pressure
    • Membrane integrity holds across repeated autoclave sterilization cycles at 121°C to 134°C
    • Surface energy near 18.5 dynes per centimeter repels oils and nonpolar liquids
    • Node-fibril microstructure resists compaction under sustained operating pressure
    • Ionic and metallic extractable levels stay very low

    Housing Characteristics

    • Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
    • Rigid polypropylene body maintains its geometry through routine filtration pressure
    • Resists stress cracking from aqueous salt and buffer solutions
    • Impact-tolerant polypropylene body withstands routine bench handling without damage

    Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work before it carries into further processing. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.

    Sterilization Guidance

    Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    17.4(absolute ethyl alcohol )
    Connection Type
    Luer-Lok/Luer Slip
    Construction
    PP
    Diameter
    30mm
    Filtration Area
    4.9cm²
    Flow Rate
    29.5ml
    Holdup Volume
    100μL
    Material
    Polytetrafluoroethylene (PTFE)
    Maximum Operating Pressure
    87psi
    Maximum Operating Temperature (°C)
    60°C
    Membrane Thickness (µm)
    80-140μm
    Pack Count
    100
    Pore Size (µm)
    0.22
    Sterility
    NonSterile
    Sterilization
    Autoclave 121°C for 30min/ Gamma 25kGy
    Volume Throughput (ml)
    120ml
    Weight
    0.91
    Wettability
    Hydrophobic
    • Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
    • Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
    • Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
    • Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
    • Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
    • Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.