Chat with us, powered by LiveChat

Secure Checkout
RC Syringe Filters, 0.45um, 13mm, Luer-Lok/Luer Slip, Non-Sterile, 100/Pk

Thumbnail Filmstrip of RC Syringe Filters, 0.45um, 13mm, Luer-Lok/Luer Slip, Non-Sterile, 100/Pk Images

    Purchase RC Syringe Filters, 0.45um, 13mm, Luer-Lok/Luer Slip, Non-Sterile, 100/Pk

    RC Syringe Filters, 0.45um, 13mm, Luer-Lok/Luer Slip, Non-Sterile, 100/Pk
    Tisch SKU: SF18102

    $127.95
    Ships in 4 weeks
     

    Tisch Scientific Regenerated Cellulose (RC) Syringe Filters, 0.45 µm, 13 mm, 100/Pk - SF18102

    Tisch Scientific's product lineup extends from filtration membranes to devices and the consumable supplies laboratories use daily. A syringe filter dispenses filtrate directly into an autosampler vial, without the intermediate collection vessel a bulk vacuum filtration setup typically needs. RC's natural cellulose adsorbs protein at under half the rate of synthetic membranes and holds absolute retention at the rated pore size. The polypropylene housing preserves sample chemistry across the flow path while holding its seal true run after run and stands firm against aqueous acids, bases, and alcohols during regular handling. When method reproducibility rests on consistent sample prep, syringe filtration holds that standard injection after injection.

    Membrane Characteristics

    • Cellulose polymer composition allows biodegradation unlike synthetic PES, PVDF, or nylon
    • Low non-specific binding preserves dilute analyte concentrations through the filtration step
    • Non-esterified cellulose structure resists acetone and ketone solvents unlike CA or nitrocellulose
    • Compatible with ammonium formate, ammonium acetate, and triethylamine LC mobile phases
    • Broad compatibility with aqueous-organic mixtures supports both HPLC and non-HPLC filtration

    Housing Characteristics

    • Minimal extractable release from the housing supports sensitive analytical work downstream
    • Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
    • Polypropylene density near 0.90 g/cm3 keeps housing weight low relative to denser engineering plastics
    • Standardized luer connection geometry provides secure engagement with standard syringe tips

    Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.

    Sterilization Guidance

    The housing supports customer autoclave sterilization at 121°C for 30 minutes.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    7.25psi
    Burst Pressure (psi)
    87psi.
    Connection Type
    Luer-Lok/Luer Slip
    Construction
    Polypropylene (PP)
    Diameter
    13mm
    Filtration Area
    1.09cm²
    Flow Rate
    35ml
    Holdup Volume
    20µl
    Material
    Regenerated Cellulose (RC)
    Maximum Operating Pressure
    87psi
    Maximum Operating Temperature (°C)
    60°C
    Membrane Thickness (µm)
    150-200
    Pack Count
    100
    Pore Size (µm)
    0.45
    Prefilter (Yes/No)
    Yes
    Prefilter Material
    Polypropylene (PP)
    Sterility
    Nonsterile
    Sterilization
    Autoclave 121°C for 30min/ gamma 25kGy
    Volume Throughput (ml)
    10ml
    Weight
    0.19
    Wettability
    Hydrophilic
    • Metabolomics Prep - Low non-specific binding retains polar metabolites in aqueous extracts ahead of LC-MS/MS metabolomic profiling and discovery.
    • Serum Assay Prep - Clarifies serum and plasma samples with low non-specific binding, preserving protein markers for downstream immunoassay analysis.
    • Water Testing Prep - A spontaneously wetting surface clarifies environmental water samples for metals, nutrients, and contaminant testing workflows.
    • HPLC Analysis - Minimizes extractables in critical HPLC sample preparation, ensuring cleaner chromatograms and accurate data generation.
    • Aqueous & Organic - Provides a hydrophilic membrane that wets spontaneously, ideal for filtering both aqueous and organic mixtures efficiently.
    • LC-MS Sample Prep - Limits extractable interference with electrospray ionization, supporting sensitive LC-MS/MS quantitation of trace analytes.