Featuring a naturally hydrophilic 0.22um regenerated cellulose membrane housed in a transparent polypropylene shell, these 25mm syringe filters deliver rapid, low-extractable filtration of aqueous and organic samples. The regenerated cellulose medium is made from pure cellulose without wetting agents, providing broad chemical resistance and high wet strength for demanding sample preparation. Each unit pairs a Female Luer Lock inlet with a Male Luer Slip outlet for secure attachment to standard syringes, and the membrane carries a 0.22um pore rating suitable for sterilizing-grade clarification of compatible solutions.
Key Regenerated Cellulose Membrane Characteristics
- Naturally hydrophilic surface wets out readily for aqueous and alcohol-based samples without added wetting agents.
- Manufactured from pure cellulose, delivering low extractables and minimal sample interference.
- Broad chemical resistance to a wide variety of solvents, supporting both aqueous and organic mobile phases.
- High wet strength maintains membrane integrity under pressure during filtration.
- 0.22um pore size provides fine clarification and sterilizing-grade retention for compatible fluids.
Key Construction Characteristics
- Transparent polypropylene housing, ultrasonically welded and integrity tested to eliminate filter by-pass.
- Female Luer Lock inlet and Male Luer Slip outlet (Luer-Lok/Luer Slip) for compatibility with standard syringes.
- 25mm membrane diameter with a 33mm housing diameter and 4.6 cm2 effective filtration area.
- Holdup volume of less than 100 microliters minimizes sample loss for costly or small-volume samples.
- Nonsterile, supplied 500 per pack, with each filter labeled by membrane material and pore size.
These filters maintain consistent flow and reliable retention across aqueous and organic solutions, protecting downstream instruments and preserving sample integrity. The low holdup volume and pure cellulose construction reduce analyte loss and contamination, supporting reproducible results in analytical workflows.
- Color
- Transparent
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- Polypropylene housing, ultrasonically welded
- Diameter
- 25mm
- Filtration Area
- 4.6 cm²
- Holdup Volume
- <100 microliter
- Inlet Connection
- Female Luer Lock
- Material
- Regenerated Cellulose (RC)
- Maximum Operating Pressure
- 80 psi
- Maximum Operating Temperature (°C)
- 90
- Membrane Color
- Transparent
- Outlet Connection
- Male Luer Slip
- Pack Count
- 500
- Pore Size (µm)
- 0.22
- Sterility
- Nonsterile
- Wettability
- Hydrophilic
- Sterile Filtration The 0.22um regenerated cellulose membrane provides sterilizing-grade clarification of compatible aqueous and buffer solutions.
- HPLC and UHPLC Sample Preparation Removes fine particulates from samples and mobile phases to protect columns and instrumentation prior to injection.
- Cell Culture Media Filtration The polypropylene housing and pure cellulose membrane suit clarification of tissue culture media and biological fluids.
- Protein and Aqueous Solution Filtration Low-extractable regenerated cellulose minimizes interference when processing protein and aqueous samples.
- Ion Chromatography Sample Prep Broad solvent compatibility supports clarification of samples for IC and analytical workflows.
- Buffer Clarification Delivers clean, particle-free buffers for analytical and laboratory preparation.