Regenerated Cellulose Syringe Filters, 0.45um, 13mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk
GVS SKU: FJ13BNPRC004AH01PF

GVS ABLUO Regenerated Cellulose (RC) Syringe Filters, 0.45 µm, 13 mm, 100/Pk - FJ13BNPRC004AH01PF

Every GVS syringe filter and membrane batch generates its own manufacturing record, filed inside the company's quality management system per policy. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. RC loads water-based and solvent samples in one step while staying stable in DMSO, aqueous buffers, and organic solvents and clarifies particulates at the rated pore size for clean injections. The polypropylene housing preserves sample chemistry across the flow path while resisting degradation from routine sample matrices and presses snugly against the membrane during the pass. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.

Selected specifically for PFAS-free sample preparation, the filter avoids the fluoropolymer components that can release per- and polyfluoroalkyl substances into an aqueous filtrate during analysis. Independent testing documents the PFAS-free performance, so the filtration step itself does not become a source of the contaminants a trace method is designed to find. For laboratories quantifying trace PFAS under EPA Method 1633 in environmental and wastewater matrices, the clean filtration background preserves data quality from sample preparation through final instrumental detection.

Membrane Characteristics

• Non-esterified cellulose structure resists acetone and ketone solvents unlike CA or nitrocellulose
• Compatible with aqueous sample matrices from serum, plasma, urine, and cell culture media
• Suitable for plasma protein precipitation supernatant filtration before LC-MS/MS injection
• Fixed absolute pore rating keeps results consistent from method to method
• Common LC-MS buffers such as ammonium acetate and formate are handled reliably

Housing Characteristics

• Minimal extractable release from the housing supports sensitive analytical work downstream
• Withstands standard 121°C steam autoclave cycles without softening or structural distortion
• Optimized internal geometry minimizes backpressure in service
• The seal formed against the membrane blocks bypass at rated operating pressure

Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day from reagent and buffer preparation through routine sample clarification. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.

For more information about chemical compatibility, please review our Chemical Compatibility Chart.

Color

Transparent

Connection Type

Luer-Lok/Luer Slip

Construction

Polypropylene Housing

Diameter

13mm

Inlet Connection

Female Luer Lock

Material

Regenerated Cellulose (RC)

Membrane Brand

ABLUO

Outlet Connection

Male Luer Slip

Pack Count

100

Pore Size (µm)

0.45

Sterility

Nonsterile

Wettability

Hydrophilic

• Degassing - Supports rapid degassing and filtration of HPLC mobile phases, preventing bubble formation in sensitive fluidic lines downstream.
• Column Guard - Protects analytical columns by effectively removing fine particulates from samples, extending column life significantly.
• Protein Sample Prep - Low non-specific binding preserves enzyme and receptor concentrations when clarifying aqueous protein solutions for bioassays.
• HPLC Analysis - Minimizes extractables in critical HPLC sample preparation, ensuring cleaner chromatograms and accurate data generation.
• Capillary Electrophoresis - Clarifies aqueous samples ahead of CE separation, preventing particulates from clogging narrow-bore capillaries.
• Autoclave Sterilizable - Withstands autoclave sterilization at 121°C, supporting aseptic buffer filtration in GMP-regulated workflows.