Tisch
Polypropylene Syringe Filters, 0.1um, 13mm, Luer-Lok/Luer Slip, Nonsterile, 100/Pk SKU: SF18066

Polypropylene (PP) Syringe Filters - SF18066

Featuring precision 0.1µm polypropylene membrane construction with a 13mm diameter platform, these filters deliver critical mycoplasma removal capabilities with exceptional 87psi burst pressure for demanding biological workflows. Economical polypropylene housing withstands autoclave sterilization at 121°C for 30 minutes while maintaining structural integrity. This combination supports reliable sterile-grade filtration for small-volume laboratory applications requiring mycoplasma clearance and bacterial retention with minimal sample loss.

Key Polypropylene Membrane Characteristics

• Hydrophobic membrane architecture requires pre-wetting with a compatible solvent before aqueous sample processing to establish flow pathways through the 0.1µm pore structure
• Cost-effective filtration platform provides an economical alternative for routine laboratory workflows while maintaining dependable performance across compatible applications
• Selective chemical compatibility accommodates acids, bases, and aqueous solutions, while being incompatible with esters that can degrade membrane integrity
• Critical sterile-grade pore size enables mycoplasma removal and bacterial retention for applications demanding sub-0.22µm filtration capabilities
• Autoclavable construction allows users to sterilize filters in-house at 121°C for 30 minutes, reducing inventory costs and supporting customized sterilization protocols

Key Construction Characteristics

• Minimal 20µl holdup volume preserves valuable samples by maximizing recovery rates in 1-10ml processing workflows where sample loss directly impacts analytical results
• High-temperature polypropylene housing operates reliably up to 100°C maximum temperature, supporting heated sample processing and thermal sterilization requirements
• Universal Luer-Lok/Luer Slip connectivity ensures compatibility with standard laboratory syringes and equipment, eliminating adapter requirements and simplifying workflow integration
• Compact 13mm filtration platform delivers efficient processing for 1-10ml sample volumes with 50ml/min flow rate at 10psi operating pressure

When your laboratory workflows demand economical mycoplasma removal with minimal sample loss, polypropylene membrane technology delivers reliable performance. Robust 87psi burst pressure provides operational confidence throughout sterile filtration procedures. Autoclavable construction combined with universal Luer connectivity ensures your processing workflows maintain both efficiency and economy across diverse small-volume applications requiring critical 0.1µm retention capabilities.

For more information about chemical and material compatibility, please review our Chemical Compatibility Chart.

Burst Pressure (psi)

87psi.

Connection Type

Luer-Lok/Luer Slip

Construction

Polypropylene (PP)

Diameter

13mm

Flow Rate

50ml/ min @10psi.

Holdup Volume

20ul

Incompatibility

Esters

Material

Polypropylene (PP)

Maximum Operating Temperature (°C)

100°C

Pack Count

100

Pore Size (µm)

0.1

Sterility

Nonsterile

Sterilization

Autoclave: 121°C for 30 minutes/ Gamma: 5kg, for 8 hours

Volume Throughput (ml)

10ml

Weight

0.19

Wetability

Hydrophobic

• Mycoplasma Removal - Critical 0.1µm retention eliminates mycoplasma contamination from cell culture media and biological preparations
• Sterile Filtration - Sub-0.22µm pore size provides bacterial retention for heat-sensitive pharmaceutical and biological solutions
• Cell Culture Media - Economical sterilization of small-volume culture media batches with autoclavable construction for repeat use
• Biological Sample Prep - Clarifies protein solutions and biological extracts while minimizing sample loss through a low holdup design
• Quality Control - Removes particulates from analytical samples requiring sterile-grade filtration before instrumental analysis
• Aqueous Solutions - Filters water-based laboratory reagents and buffers after appropriate membrane pre-wetting with compatible solvent