Tisch Scientific PTFE Syringe Filters, 0.1 µm, 13 mm, 100/Pk - SF18087
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. A single-use hydrophobic vent filter reaches sterilizing-grade retention on a vent line without the autoclave cycle or in-line housing a reusable gas filtration setup would require. PTFE stays chemically inert against aggressive solvents, strong acids, and alkalis in service while delivering sterilizing-grade gas and vent filtration and suits gas, vent, and solvent-stream filtration. Low-extractable polypropylene keeps sample purity intact through the filtration pass while resisting degradation from routine sample matrices and arrives factory-sterilized and individually sealed for sterile use. Downstream equipment and work areas stay protected from airborne bacterial contamination once the vent path runs through the membrane.
Membrane Characteristics
- Stable across a wide operating temperature range for demanding methods
- Gas-venting and liquid-blocking function survives repeated autoclave sterilization cycles
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- Absolute pore rating delivers reproducible retention across every protocol
- Inert composition offers no nutrient source for microbial growth
Housing Characteristics
- Withstands standard 121°C steam autoclave cycles without softening or structural distortion
- Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
- Polypropylene housing tolerates ethylene oxide gas sterilization cycles without softening or dimensional distortion
- Standardized luer connection geometry provides secure engagement with standard syringe tips
An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on from initial prep through final use. Request available pack sizes and lead times across this filtration line's membrane options from the Tisch Scientific team.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 26.11(absolute ethyl alcohol )
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 13mm
- Filtration Area
- 1.09cm²
- Flow Rate
- 3ml
- Holdup Volume
- 10μL
- Incompatibility
- Aqueous samples without rewetting
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 0.1
- Sterility
- Sterile
- Volume Throughput (ml)
- 10ml
- Weight
- 0.40
- Wettability
- Hydrophobic
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Toxicology Screening - Clarifies protein-precipitated serum, plasma, and urine extracts ahead of LC-MS or GC-MS drug screening analysis.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
- Battery Electrolyte Prep - Clarifies lithium-ion battery electrolyte in carbonate solvents ahead of GC-MS purity and impurity analysis.
- Photoresist Filtration - Clarifies photoresist solutions in organic casting solvent ahead of spin-coating, reducing particulate defect risk.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.