Tisch Scientific PTFE Syringe Filters, 0.1 µm, 33 mm, 100/Pk - SF18260
Tisch Scientific makes the ordering process straightforward, turning around requests for pricing and product information fast. A sterilizing-grade syringe filter delivers point-of-use sterile filtration in a single-use format, without the housing and gasket maintenance a reusable stainless steel filter holder requires. PTFE stays chemically inert against aggressive solvents, strong acids, and alkalis in service while accepting aqueous samples without alcohol pre-wetting and handles concentrated acids and bases. Polyolefin construction sheds virtually no extractable material into the sample while pressing snugly against the membrane during the pass and is supplied pre-sterilized in individual packaging for sterile sample preparation. When sample preparation calls for a sterile filtrate at the point of injection, sterilizing-grade absolute retention delivers it directly, protecting the analytical method from microbial interference.
Membrane Characteristics
- Hydrofluoric acid resistance holds even in fully acid-digested samples
- Solvent tolerance includes full-strength tetrahydrofuran and chlorinated solvents such as dichloromethane
- Biological inertness resists enzymatic attack from proteases and lipases
- Absolute pore rating delivers reproducible retention across every protocol
- UL 94 V-0 rating confirms the highest self-extinguishing classification
Housing Characteristics
- Rigid polypropylene body maintains its geometry through routine filtration pressure
- Polypropylene housing retains its chemical integrity under vaporized hydrogen peroxide decontamination cycles used in aseptic processing isolators
- Minimal extractable release from the housing supports sensitive analytical work downstream
- Optimized internal geometry minimizes backpressure in service
Fine particulates that slip through raise your system backpressure and bring maintenance forward. Upstream buffer clarification keeps your run from stalling on particulates that slipped through while keeping the filtrate analytically clean. Reach out to the Tisch Scientific team about minimum order quantities and shipping timelines for your filtration product selection.
Sterilization Guidance
The device arrives factory sterile and is intended for single-use sample preparation.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 29psi
- Burst Pressure (psi)
- 87psi.
- Connection Type
- Luer-Lok/Luer Slip
- Construction
- PP
- Diameter
- 33mm
- Filtration Area
- 4.6cm²
- Flow Rate
- 12ml
- Holdup Volume
- 100μL
- Incompatibility
- Bases, esters, ethers, ketones
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 87psi
- Maximum Operating Temperature (°C)
- 60°C
- Membrane Thickness (µm)
- 80-140μm
- Pack Count
- 100
- Pore Size (µm)
- 0.1
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- PP
- Sterility
- Sterile
- Volume Throughput (ml)
- 110ml
- Weight
- 1.46
- Wettability
- Hydrophilic
- Fuel Analysis Prep - Clarifies gasoline and other petroleum samples ahead of gas chromatography, protecting injector ports from residue buildup.
- Aggressive Solvents - Clarifies chlorinated hydrocarbons and aromatics without membrane degradation, delivering pure filtrate quality consistently.
- Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
- Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
- Mobile Phase Prep - Extends column life by consistently removing particulates from organic HPLC mobile phases before every injection.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.