Whatman GD/X Nylon Syringe Filters, 0.2 µm, 25 mm, 150/Pk - 6870-2502
Whatman ties GD/X prefiltration performance to one closely held fiber-grade standard applied at every production run, keeping results repeatable from one manufacturing lot to the next. At the sub-micron pore rating, a syringe filter delivers sterilizing-grade retention at the point of use. Nylon arrives in economical bulk packaging for high-volume routine filtration while achieving sterilizing-grade performance at finest pore openings and holds dimensional stability under rated backpressure. Polyolefin construction sheds virtually no extractable material into the sample and sustains its dimensional form through high-temperature filtration workflows. Where bacterial contamination must stay out of the sample, manufacturer-tested retention keeps the instrument and downstream assay protected without a housing to maintain or clean.
Prefiltration
- Two-stage construction pairs a glass microfiber depth prefilter with the final membrane
- Glass microfiber depth media loads particulate across its full thickness
- Glass microfiber prefilter shields the downstream membrane from bulk particulate
- High dirt-holding capacity extends usable throughput by delaying membrane clogging
Membrane Characteristics
- Filtration clarifies HPLC mobile phase buffers of particulates
- Saturation moisture uptake reaches up to 8% by resin weight
- Resonance-stabilized amide bonds anchor nylon's resistance to alkaline hydrolysis
- Tortuous, reticulated pore structure yields more usable filtration area than capillary-pore membranes
- Hydrophilic surface takes up aqueous samples with no pre-wetting
Housing Characteristics
- Plasticizer-free polyolefin construction keeps the fluid path clean
- Optimized internal geometry minimizes backpressure in service
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
Particulates in your buffers, reagents, and aqueous samples slow your preparation and throw off its consistency. General-purpose aqueous filtration supports the sample types you handle every day so you can standardize one filter across most aqueous methods. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
Customer autoclave compatibility at 121°C accommodates in-lab sterilization timing.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 2.9 bar (42 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.6cm²
- Flow Rate
- 46
- Holdup Volume
- 1.4ml
- Material
- Nylon
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 0.2
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophilic
- Drinking Water Analysis - Clarifies tap and source water samples ahead of metals, nitrate, and trace-contaminant compliance testing.
- QuEChERS Cleanup - Clarifies acetonitrile food extracts after dispersive cleanup, protecting GC-MS and LC-MS systems during pesticide screening.
- Fermentation Monitoring - Clarifies samples from microbial fermentation for rapid analyte measurement of glucose, ethanol, and metabolite levels.
- Amino Acid Profiling - Clarifies aqueous sample digests for HPLC and LC-MS amino acid analysis in food, nutrition, and fermentation monitoring.
- Ink and Dye Filtration - Filters aqueous and solvent-based inks and dyes, removing pigment agglomerates ahead of color strength analysis.
- Solvent Filtering - Supports clarification of ester-based and alcohol solvents with precision during routine laboratory sample processing.
Related Products