Whatman GD/X PVDF Syringe Filters, 0.45 µm, 25 mm, 150/Pk - 6873-2504
Whatman places a fibrous glass mat before the final membrane in every GD/X device, clearing a turbid sample in one pass through the same housing. Many syringe filters ship with lot-specific quality documentation, giving analysts documented traceability beyond what an ad hoc bulk filtration setup typically provides. A hydration layer at the pore surface keeps HPLC analytes from adhering and loads aqueous mobile phases on first contact. Polyolefin construction sheds virtually no extractable material into the sample and stands firm against aqueous acids, bases, and alcohols during regular handling. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Prefiltration
- Glass microfiber prefilter shields the downstream membrane from bulk particulate
- High dirt-holding capacity extends usable throughput by delaying membrane clogging
- Nominal glass microfiber depth layer sustains flow through high-solids, particle-laden samples
- Upstream glass microfiber prefilter layer captures coarse particulate ahead of the membrane
Membrane Characteristics
- Low extractables preserve a clean chromatographic baseline
- Fluorinated polymer chemistry resists ozone, UV, and ionizing radiation
- Absolute pore rating ensures reproducible results between test runs
- Aqueous and HPLC samples wet the surface without pre-wetting
- Autoclave sterilization cycles leave pore structure and flow performance intact
Housing Characteristics
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream
- Polypropylene housing tolerates dilute aqueous acids, bases, and alcohols used in routine sample prep
- Standardized luer connection geometry provides secure engagement with standard syringe tips
A particulate-laden aqueous sample makes the rest of your preparation unpredictable. Consistent aqueous clarification clears particulates without slowing your bench routine across the buffers and reagents your day-to-day prep depends on. Request a quote on bulk pricing for larger filtration orders from the Tisch Scientific team.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Bubble Point (psi)
- 1.2 bar (17 psi)
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 25mm
- Filtration Area
- 4.6cm²
- Flow Rate
- 28
- Holdup Volume
- 1.4ml
- Material
- Polyvinylidene Difluoride (PVDF)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 150
- Pore Size (µm)
- 0.45
- Prefilter (Yes/No)
- Yes
- Prefilter Material
- Glass Microfiber (GMF)
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 100ml
- Wettability
- Hydrophobic
- Beverage QC - Clarifies wine, beer, and juice samples ahead of HPLC testing for organic acids, sugars, and preservatives.
- Immunochemistry Research - Delivers exceptional chemical resistance for mild organic mixtures used in sensitive immunochemical research applications.
- IC Guard Filtration - Removes particulates from aqueous samples before ion analysis, keeping detector cells free of fouling between injections.
- Trace Analysis - Prevents non-specific binding in trace analysis, keeping low-concentration analytes in solution for reliable detection.
- Biological Samples - Clarifies protein-rich solutions without loss of target molecules, preserving sample integrity for critical downstream assays.
- Pharmaceutical QC - Supports routine quality control testing by reliably filtering mild organic solvent mixtures and drug formulations daily.
Related Products