Chat with us, powered by LiveChat

Secure Checkout
GD/X 25mm Syringe Filter, PTFE Filteration Medium, 0.2um (150 pcs)

Thumbnail Filmstrip of GD/X 25mm Syringe Filter, PTFE Filteration Medium, 0.2um (150 pcs) Images

    Purchase GD/X 25mm Syringe Filter, PTFE Filteration Medium, 0.2um (150 pcs)

    GD/X 25mm Syringe Filter, PTFE Filteration Medium, 0.2um (150 pcs)
    Whatman SKU: 6874-2502

    $646.99
    Ships in 4 business days
     

    Whatman GD/X PTFE Syringe Filters, 0.2 µm, 25 mm, 150/Pk - 6874-2502

    Whatman stages multiple glass fiber layers inside the GD/X cartridge to intercept particles in progressive steps, leaving only the smallest fraction to reach the tightly rated final membrane. Gas and vent service calls for a hydrophobic syringe filter rated to the same sterilizing-grade pore size as its liquid counterpart. The hydrophobic PTFE membrane provides bacterial retention in gas and vent streams and filters aggressive organic solvents without breakdown. Polypropylene construction holds its dimensional form through high-temperature sample preparation while holding its seal true run after run and preserves sample chemistry across the flow path. Downstream equipment and work areas stay protected from airborne bacterial contamination once the vent path runs through the membrane.

    Prefiltration

    • High dirt-holding capacity extends usable throughput by delaying membrane clogging
    • Nominal glass microfiber depth layer sustains flow through high-solids, particle-laden samples
    • Upstream glass microfiber prefilter layer captures coarse particulate ahead of the membrane
    • Glass microfiber depth media loads particulate across its full thickness

    Membrane Characteristics

    • Stable across a wide operating temperature range for demanding methods
    • Fully fluorinated carbon backbone resists ultraviolet and ozone degradation
    • Insolubility in all known organic solvents avoids swelling and pore distortion
    • UL 94 V-0 rating confirms the highest self-extinguishing classification
    • Node-fibril microstructure resists compaction under sustained operating pressure

    Housing Characteristics

    • Low moisture absorption keeps the housing dimensionally stable through humid storage and shipping
    • Housing tolerates elevated-temperature aqueous and solvent sample filtration up to about 80°C without softening
    • Minimal extractable release from the housing supports sensitive analytical work downstream
    • Minimal intrinsic autofluorescence from the polypropylene housing supports background-sensitive fluorescence-based assay work downstream

    An aggressive solvent can leach or break down a vulnerable filter and carry debris into your prep. Solvent-stream filtration handles the solvents and reagents your methods rely on across the organic solvents and harsh reagents your methods use. Request Whatman's quality documentation to support your filtration step meeting a recognized laboratory-science standard.

    Sterilization Guidance

    Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.

    For more information about chemical compatibility, please review our Chemical Compatibility Chart.

    Bubble Point (psi)
    1.0 bar (15 psi) [IPA]
    Burst Pressure (psi)
    75psi
    Connection Type
    Luer-Lok/ Luer Slip
    Construction
    Polypropylene
    Diameter
    25mm
    Filtration Area
    4.6cm²
    Holdup Volume
    1.4ml
    Material
    GF/PTFE
    Maximum Operating Pressure
    75psi
    Maximum Operating Temperature (°C)
    121°C
    Pack Count
    150
    Pore Size (µm)
    0.2
    Prefilter (Yes/No)
    Yes
    Prefilter Material
    Glass Microfiber (GMF)
    Sterility
    Nonsterile
    Sterilization
    Autoclavable 121°C
    Volume Throughput (ml)
    Up to 100ml
    Wettability
    Hydrophobic
    • Air Monitoring - Ensures precise capture of airborne particulates for environmental analysis in demanding atmospheric monitoring conditions.
    • Cryogenic Fluids - Delivers consistent performance across extreme temperature ranges, filtering cryogenic liquids with dependable, reliable results.
    • Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
    • Dissolution Testing - Stops the dissolution reaction and clarifies samples, with low API binding for accurate potency quantitation.
    • Pump Protection - Acts as a hydrophobic barrier that protects vacuum pumps from corrosive moisture and particulate damage.
    • Environmental Prep - Clears heavy particulate loads from solvent-based soil and sediment extracts, pairing a glass prefilter with a PTFE membrane.

    Related Products