Whatman Puradisc PTFE Syringe Filters, 1 µm, 13 mm, 100/Pk - 6784-1310
Whatman maintains in-house specialists who set and verify material specifications separately for its cellulose, glass-fiber, and polymer membrane chemistries, tailoring quality control to how each one behaves in use. Syringe filters span a wide range of membrane chemistries and pore sizes, so the format can be matched to the sample matrix and solvent system in use. PTFE suits solvent and reagent filtration where other membranes fail while removing particles with absolute precision at each stated micron rating and stays chemically inert against solvents, acids, and alkalis. The PP housing stays inert across common laboratory solvents and buffers in routine use while preserving sample chemistry across the flow path and leaves no seam for sample to bypass the membrane. Where small-volume samples must reach the instrument clean, low hold-up volume keeps sample loss minimal while the instrument stays protected from particulate damage.
Membrane Characteristics
- Water contact angle near 120 degrees marks strong hydrophobicity
- Inert composition offers no nutrient source for microbial growth
- Chemical resistance spans the full pH 1 to 14 range
- Gas-venting and liquid-blocking function survives repeated autoclave sterilization cycles
- Hydrofluoric acid resistance holds even in fully acid-digested samples
Housing Characteristics
- Minimal ionic background from the polypropylene housing supports ion chromatography and trace-metal ICP-MS sample preparation
- Medical-grade polypropylene with broad chemical compatibility
- Burst pressure rating provides a wide safety margin above the rated maximum operating pressure
- The seal formed against the membrane blocks bypass at rated operating pressure
Particulates left in your organic solvents and reagents carry downstream into the step that depends on a clean feed. Reliable solvent prefiltration keeps a stray particulate from carrying into your downstream work from reaction mixtures and crude extracts through further processing. Contact Tisch Scientific for a quote, lead time, or stock-on-hand check on your filtration product selection.
Sterilization Guidance
Standard autoclave cycles at 121°C for 30 minutes prepare the device for sterile workflows.
For more information about chemical compatibility, please review our Chemical Compatibility Chart.
- Burst Pressure (psi)
- 75psi
- Connection Type
- Luer-Lok/ Luer Slip
- Construction
- Polypropylene
- Diameter
- 13mm
- Filtration Area
- 1.3cm²
- Holdup Volume
- <25µl
- Material
- Polytetrafluoroethylene (PTFE)
- Maximum Operating Pressure
- 75psi
- Maximum Operating Temperature (°C)
- 121°C
- Pack Count
- 100
- Pore Size (µm)
- 1
- Prefilter (Yes/No)
- No
- Sterility
- Nonsterile
- Sterilization
- Autoclavable 121°C
- Volume Throughput (ml)
- Up to 10ml
- Wettability
- Hydrophobic
- Dye and Pigment Analysis - Clarifies dye solutions in DMF, NMP, and other aggressive organics ahead of spectrophotometric color strength testing.
- Trace Metals Analysis - PTFE's low metal-extractable profile clarifies acid-digested samples for clean, low-background ICP-MS and ICP-OES results.
- Agrochemical Formulation QC - Clarifies technical pesticide concentrates in organic solvent ahead of HPLC potency and impurity analysis.
- Polymer GPC Prep - Clarifies polymer solutions in THF ahead of gel permeation chromatography, protecting columns from particulates.
- Cosmetics Testing - Clarifies lotions and emulsions after alcohol pre-wetting, keeping products free of particulate contaminants.
- Extractables Testing - Clarifies packaging material organic solvent extracts ahead of LC-MS analysis, keeping background low for leachable detection.
Related Products